Search Results
Pump Trap UNA 25-PK Condensate Lifter UNA 25-PS
This installation & operating manual will help you use the following types of equipment safely and efficiently for their intended purpose. Pump Trap UNA 25-PK Condensate Lifter UNA 25-PS
Media Library
Pump Trap UNA 25-PK, PN 40, DN 40 Condensate Lifter UNA 25-PS, PN 40, DN 40
UNA 25-PS and UNA 25-PK is steam process equipment designed for the effective removal of condensate from steam. Condensate is discharged by means of motive steam. The equipment can therefore remove condensate even if the steam pressure is so low that conventional steam traps could no longer discharge condensate. Equipment type UNA 25-PS works as cyclic condensate lifter without valve closure. In this case the upstream pressure must be lower than the back pressure. Equipment type UNA 25-PK works in pumping mode as cyclic condensate lifter with rolling ball valve closure. If there is (enough) differential pressure, this type of equipment will also work as modulating steam trap.
Media Library
Steam trap UNA 23, UNA 25, UNA 26, UNA 27h
UNA 2... are ball float traps with a rolling ball regulator (SIMPLEX/DUPLEX control unit) or bellows regulator (SIMPLEX-/DUPLEX-MAX control unit). As their operation is not dependent on back pressure, these steam traps are suitable for universal use.
Media Library
UNA 25-PK-PS ball float steam traps with pump function
Ball float steam traps with automated pump function guarantees condensate discharge with reduced steam pressure or high back pressure for regulated and special plate-type heat exchangers with major load fluctuations and drainage of vacuum systems.
/global/en-US/products/steam-traps/una-25pk-ps-ball-float-steam-traps-with-pump-functionProducts
Ball float steam trap UNA–special type 62B, PN 25, PN 63, UNA PN 25
UNA Special and UNA PN 25 are designed for draining condensate from steam systems. Equipment with control unit SIMPLEX can also be used for discharging condensate from other gases or gas mixtures. Equipment with control unit DUPLEX is designed for additional air venting the installation.
Media Library
Purgeurs à flotteur UNA 43 (PN 16/CL 125/JIS 10K), UNA 46 (PN 40/CL 150/CL 300/JIS 10K/JIS 20K)
Les appareils des types UNA 43 et UNA 46 servent à évacuer le condensat provenant de la vapeur d’eau des appareils consommateurs chauffés par la vapeur. Les appareils du type UNA 43 peuvent être utilisés également pour évacuer le condensat provenant de l'air comprimé. Les appareils des types UNA 46 peuvent être utilisés également pour évacuer le condensat provenant d'autres gaz ou mélanges gazeux.
Media Library
Float Trap UNA · PN 25 DN 80 and 100 mm (3" and 4")
Float trap with slide valve closing mechanism for draining condensate from steam systems and for the discharge of other cold condensates or distillates. The slide valve is operated by the ball float as a function of the condesate level in the trap, i.e. the cross-sectional area depends on the amount of condensate formed. Body with flanged cover. The control unit is connected to the cover. After removal of the cover the control unit is easily accessible without removing the trap from the line. Standard design with vent valve and lifting lever permitting purging of the trap during operation.
Media Library
Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Steam traps type UNA 43 and UNA 46 are designed for draining condensate from steam systems. Steam traps type UNA 43 can also be used for removing condensate from compressed air systems. Steam traps type UNA 46 can also be used for removing condensate from gases or gas mixtures. The equipment must only be used within the allowable pressure and temperature limits and only if the chemical and corrosive influences on the equipment are taken into account.
Media Library
Ball-Float Steam Trap UNA–Special type 62B, UNA–Special PN 25, UNA–Special PN 63, UNA PN 25
This installation & operating manual will help you use the following types of equipment safely and efficiently for their intended purpose. UNA–Special type 62B UNA–Special PN 25 UNA–Special PN 63 UNA PN 25
Media Library
Quick TP insulation jacket for UNA 4x horizontal DN 15 – 25
Rugged, wear resistant, easy to install. Float type steam traps of UNA 4 series have been released for sale several years ago. The new insulation jacket for UNA 4x h DN15 – 25 makes it easy and simple to save energy. Unlike common insulation systems this insulation jacket is made to fit the steam trap perfectly, thus no special skills are necessary, everybody can mount it. The easy handling was achieved by two stable half shells, which are fitted to the steam trap. The stable shape of the insulation jacket is extremely resistant to wear and can be used for many years without loss of quality. The insulation material is waterproof, UV-proof, temperature resistant up to 250 °C, has a high chemical resistance and is selfextinguishing.